TechTerm HMI Terminal

Handheld HMI Terminals

Looking for a low-cost, flexible handheld terminal? Specifically designed for industrial applications, the TechTerm is a rugged and fully functional ASCII terminal. Menu-programmable function keys will store a total of fifteen selected characters. Your equipment can be used to directly control the terminal using private escape sequences, including cursor movement, appearance, key "click," and several different distinct signal tones from the built-in speaker.

Function key definitions and operating parameters are stored in non-volatile memory. Available I/O configurations include RS-232 and RS-422 as well as standard CMOS/LSTTL logic levels. If you do not want to rely on line-power, an optional rechargeable battery or the ability to use commercially available alkaline batteries are both available. A unique built-in retractable hanger provides the ability to easily hang the terminal (line-powered only).

Like all Two Technologies' products, the TechTerm is remarkably rugged. The case is molded from Cycolac ABS®, one of the most durable, chemical-resistant materials available on the market today. Securely framed and clamped in place, the keypad surface provides excellent splash resistance and prevents curling or peeling of the keypad overlay. Standard keypad layouts include 45 and 30 keys. Custom keypad configurations are available custom graphics.

Options and Accessories

CABLES
7 ft. Extended Coiled Cables Part Number
• Modular to Modular, Black 1210-7-BK
• Modular to Modular, Gray 1210-7
• Modular to Modular, Non-reversing, Gray 1210-7-NR
• Modular to Stripped Leads, Black (1210-HD) 10172
15 ft. Extended Cables Part Number
• Modular to Modular, Black 1210-15-BK
• Modular to Modular, Gray 1210-15
Permanent Connection Cable Part Number
• 7 ft. with DE-9P Standard 2T Pin-outs 90849
• 7 ft. with 6-Pin Modular Termination Suffix-PW
• 15 ft. with 6-Pin Modular Termination Suffix-PW15
• 7 ft. with DB-25P, DB-25S, DE-9S, DE-9P, DA-15 Termination **
• 15 ft. with DB-25P, DB-25S, DE-9S, DE-9P, DA-15 Termination **
**Wiring configuration must be provided; set up charges and minimums may apply.
Note: Permanent wire cables are not available with battery powered units.
ADAPTERS AND POWER SUPPLIES
Modular to "D" Connector Kits Part Number
• Modular to DE-9P 1270-M-KIT
• Modular to DE-9S 1270-F-KIT
• Modular to DB-25P 1280-M-KIT
• Modular to DB-25S 1280-F-KIT
• Connector-Modular Socket (8-Inch Stripped and Tinned) 623K
Wired Adaptors with Power Socket Part Number
• Modular to DE-9S (PCAT) 91446
• Modular to DB-25P (DTE) 1280-DTE
• Modular to DB-25S (DCE) 1280-DCE
Power Supplies Part Number
• Wall Mount Battery Charger 13799
• Power Supply 1226-1
OTHER ACCESSORIES AND OPTIONS
Protective Boot Part Number
• SB-160-Yellow 12849
• SB-160-Green 12848
• SB-160-Gray 12847
• SB-160-Black 12665
• Protective Neoprene Boot for Battery Unit 91907
Carrying Cases Part Number
• Hard-sided with Handle TTCA-8
Mounts & Mounting Brackets Part Number
• Mounting Bracket (TTH-130) 10130
RTV Seal*
Keypad & Display
Keypad, Display & Hangar
*Not available with elastomeric keypad.
Display Options Standard Unit Battery Unit
• LCD Twisted Nematic Display Standard Standard
• Supertwist Available Available
• Supertwist Backlit Available Available
LED Supertwist Backlit Available Not Available
• Supertwist Extended Temperature Backlit Available Available
• Vacuum Fluorescent Display (VFD) Available Not Available
• Extended Temperature (VFD) Available Not Available
Interface Options Standard Unit Battery Unit
• RS-232 Available Available
• RS-422 Available Available
• CMOS/TTL Available Available
Power Options Standard Unit Battery Unit
• 5.0 Volts DC ± 5% Available Not Available
• 7.5 to 12 Volt DC Available Not Available
• 9.5 to 28 Volts DC Available Not Available
• Built-in Rechargeable Battery Not Available Available
Keypad Options Standard Unit Battery Unit
• 20 Key Elastomeric Available Available
• 30 Key Elastomeric Available Available
• 45 Key Elastomeric Available Available
• 20 Key Membrane Available Available
• 30 Key Membrane Available Available
• 45 Key Membrane Available Available
• 15, 32, 40 and Custom Key Pad Configurations Custom Custom
• 20 Key Phosphorescent Custom Custom
• 45 Key Phosphorescent Available Available
• 45 Key Backlit Phosphorescent Available Not Available
• Backlit 20,30,40,45 Key Available Not Available
E-Stop/Liveman Options Standard Unit Battery Unit
• E-Stop w/10 conductor cable Not Available Not Available
• Liveman w/14 conductor cable DA-15 connector Not Available Not Available

Elastomeric: This keypad provides a great look and excellent tactile feel. Epoxy caps make this keypad extremely resistant to wear and suitable for all environments, except where petroleum-based chemicals (oil) are present.

Membrane: Best used when working in harsh conditions where chemical, dirt and liquids may be present.

Backlit: Best used in low light conditions.